Skip to main content
Indiana Wesleyan University Support Knowledge Base

Video Camera and Encoder

Overview

This page gives a oversight of how the encoder system functions and how you use it properly. It goes over where you can find these systems, how the places encoders look, when you should use this feature, and how to use it.  More information is in the hyperlink connected to information on the encoder title at the bottom of this page.  

Locations

In labs:

Noggle Christian Ministries Worship Lab (Room 134)

(control panel that controls functions of the recording)

Elder Hall Speech Lab (Room 147)

(Control panel that controls the functions of the recording) 


(Remote that controls some aspects of the system) 

​(Desktop, and controls of the encoder system)

Ott Hall Gross Anatomy Lab (Room 272)

What this Encoder can do

Recording to a video file

Noggle Christian Ministries Worship Lab (Room 134)

(Plug your USB drive into here before recording anything)

Elder Hall Speech Lab (Room 147)

(Plug your USB drive into here (labeled D) before recording)

When should you use this feature, and how do you use it?

Use this feature when you want to make a recording to a flash memory stick. By going to these various labs you can record a number of things to be saved on a Flash memory stick. 

Noggle Christian Ministries Worship Lab (Room 134)

First stick the FLASH MEMORY STICK into the USB DRIVE slot (Reference the picture above for this classroom of where the USB port is located) 

STEPS OF RECORDING, STOPPING, AND FUNCTIONS OF THE ENCODER.  

A.) Press the button (labeled A) to start recording

B.) Press the button to stop the recording and to be saved onto the FLASH MEMORY STICK. (Labeled B)

C.) Press the + or - to zoom in or out on the camera. (Labeled C) 

D.) Press any of the arrow buttons to pan up or down, left or right on the camera. (Labeled D) 

E.) Press this button for help on how to work the ENCODER. (Labeled E)

F.) Press the button to center the camera back to its original frame. (Labeled F) 

Lastly, remove your FLASH MEMORY STICK that has your saved recording on it. (Reference picture above for this classroom of where to locate the FLASH MEMORY STICK). 

Elder Hall Speech Lab (Room 147)

First stick the flash memory stick into its designated slot (Labeled D) 

A.) Press the Button (Labeled A) to start recording. 

B.) Press the button (Labeled B) to stop recording completely. 

C.) Press the Button (Labeled C) to pause the recording then hit record again to start the recording process from where you left off. 

Lastly, remove your FLASH MEMORY STICK from the slot labeled D.

INFORMATION ON ENCODER 

Reference header above for a hyperlink to another site with more information.  

  • Was this article helpful?