108-110 Double Classroom AV
This double room is two independent rooms, both with teaching stations, projectors and sound systems. They become one large room when the movable wall is opened, with 110 being the front of the room.
Room 108 functions as a Standard Classroom.
Room 110 Displays
This classroom has a fully equipped teaching station, sound system, and one display.
- A ceiling mounted laser Projector
- Projects onto manual screen on the front wall of the room.
- A preview monitor on top of the cart shows the same content that is sent to the projector
- Resolution = 1920 x 1200 (16:10 aspect ratio)
When the wall is open and the rooms are in combined mode, a wall mounted 55" TV in 108 will automatically show the same content that appears on the projector in 110. The On and Off buttons that control the projector's power will also control the TV's power.
Room 110 Control
Find further instructions here:
Teaching Station Control
Room 110 Sources
The teaching station provides multiple ways to share a computer or mobile device to the projection screen and ceiling speakers.
- USB-C cable for connecting a mobile device (Laptop, tablet or smart phone)
- HDMI cable for connecting a laptop computer
- USB; plug in a USB flash drive or a USB document camera to this port. Then press the PC button and browse to the connected peripheral.
- Desktop PC
Audio
Each room has its own speaker zone, and they automatically combine when the movable wall is opened.
- 8 Ceiling Speakers
- 110 has 4 speakers
- 108 has 4 speakers connected to its teaching station,
- When the dividing wall is open, all 8 speakers will play the source that is selected (and wireless microphone audio) from room 110
-
Larger volume control knob at the teaching station, controls program audio
- A wireless microphone system with handheld and body-worn microphones. Only one can be used at a time.
- Volume knob and mute button specifically for microphone volume
Troubleshooting
- I cannot turn on the TV in room 108.
- The wall-mounted TV monitor in 108 does not display the video or image I have selected at the teaching station in 108.
This is common; the TV in 108 can only turn on and show selected content from 110, and only when the wall is open. Make sure the wall is open, and that the ceiling mounted partition sensors are showing green LED indicators. Make sure that the teaching stations in both 108 and 110 are powered on, and the correct cables are connected to the nearby wall plates.
If the partition sensors show red LEDs instead of green when the wall is open, contact the support center for assistance.