Skip to main content
Indiana Wesleyan University Support Knowledge Base

Ott Hall Classroom 380

OHSN Active Learning Classroom 380

Three Displays

This classroom has a teaching station, sound system, and three displays.​​

  • A - Short Throw Interactive Projector
    • Mounted from Wall above the Whiteboard
    • at the front of the room
  • B and C - Short Throw Interactive Projectors
    • Mounted from Wall above the Whiteboard
    • on the side walls
  • By default, all projectors display the same image from the main system
  • Projectors B and C can display an independent image using the local connection below the display.
  • Resolution: 1920 x 1080 (16:9 aspect ratio)


The teaching station will provide multiple sources which can be shown on one or more of the displays:​

  • HDMI cable for a mobile device (Laptop, tablet or smart phone)
  • Wireless cast/mirror a mobile device, using Airplay, Miracast, or Google cast (no apps required)
  • Desktop PC
    • USB document camera
    • USB webcam
  • Browser
  • Digital Whiteboard
  • HDMI jacks (in wall plates beneath projectors B and C)


  • Ceiling Speakers
  • Volume Control on interactive monitor (touch screen to make volume control appear)
  • Audio from devices connected beneath projectors B and C will utilize the projector's built in speakers


  • 24" interactive touchscreen Monitor for source selection, control of projector, and digital whiteboarding.
  •  WolfVision Cynap processor

Equipment Location

  • Spectrum Compact Presentation Lectern


Turning on the System

If the monitor appears dark, tap the screen, which wakes up the system and turns the projector on within a few seconds.

o   If the monitor and projector do not turn on when you tap the screen, then open the front door of the teaching station and press the white power button on the Cynap processor. It will appear green after it is powered on.

o   If the Cynap processor’s power button is already green, then make sure the monitor is turned on, as evidenced by a blue LED on the lower right bezel of the monitor. If the LED is amber instead of blue, tap the amber light to make it turn blue.

Connecting and Selecting a Source

  1. To connect a portable computer or tablet, you may connect it using either the HDMI cable or wireless casting (using Airplay, Miracast or Chromecast). If you are wirelessly casting, you may skip the following steps; just search on your mobile device for the wireless display labeled "OHSN 380."

  2. To select a source, Tap the screen to show the control ribbon; then tap on the yellow [+] button and select the desired source.

  3. When a computer or tablet is connected to the teaching station's HDMI cable, it will appear as ‘Laptop’ on the source icons when you tap the yellow [+] button.

  4. If you want to use the provided desktop PC, wiggle the mouse, or press a key on the keyboard to wake the PC from sleep mode. If the PC is powered off, press its power button.

Turning off the System

  1. Tap the screen and click on the [...] icon in the bottom right corner.

  2. Tap the ‘End Presentation’ button and choose ‘Power Saving Mode.

  3. Or, if you wish to keep using the interactive monitor but turn off the projector, simply touch the 'Turn Off Display' button (instead of the 'End Presentation' button).

  4. Please leave the PC and monitor powered on. This way, it will enter sleep mode, and receive any necessary security updates, and a tap to the monitor will start up the system again.


  1. Document Camera: Connect the Hovercam's USB cable to the computer's USB jack. Open the Camera app on the PC, maximize the window, or use conferencing software like Zoom or Teams.

  2. Webcam: Connect the Logitech Brio webcam, with USB cable to the computer's USB jack. Use conferencing software like Zoom or Teams.

  3. Microphone: When using Zoom or Teams, the Hovercam or the Brio can be selected for a microphone input.


For advanced instructions of this version of standard classroom technology, click here.

  • Was this article helpful?